Condition:
RefurbishedThe Cisco Catalyst 4948 is a wire-speed, low-latency, Layer 2-4, 1-rack-unit (1 RU) fixed-configuration switch for rack-optimized server switching. Based on the proven Cisco Catalyst 4500 Series hardware and software architecture, the Cisco Catalyst 4948 Series offers exceptional performance and reliability for low density, multilayer aggregation of high performance servers and workstations. The Cisco Catalyst 4948 offers 48 ports of wire-speed 10/100/1000BASE-T with 4 alternative wired ports that can accommodate optional 1000BASE-X Small Form-Factor Pluggable (SFP) optics. Exceptional reliability and serviceability are delivered with optional internal AC or DC 1 1 hot-swappable power supplies and a hot-swappable fan tray with redundant fans.
General
Device Type Switch
Enclosure Type Rack-mountable - 1U
Width 17.3 in
Depth 16.1 in
Height 1.7 in
Weight 16.5 lbs
Processor
Processor 1 : 266 MHz
Memory
RAM 256 MB SDRAM
Flash Memory 64 MB flash
Networking
Ports Qty 48 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
Data Transfer Rate 1 Gbps
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Routing Protocol RIP-1, RIP-2, EIGRP, static IP routing
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Connectivity Technology Wired
Switching Protocol Ethernet
MAC Address Table Size 32K entries
Status Indicators Link activity, power, link OK, system, status
Features Layer 3 switching, layer 2 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, ARP support, trunking, Cisco Fast EtherChannel, VLAN support, Cisco Gigabit EtherChannel , IGMP snooping, Syslog support, manageable, MAC address filtering, Broadcast Storm Control, IPv6 support, Quality of Service (QoS)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Expansion / Connectivity
Expansion Slots Total (Free) 4 ( 4 ) x SFP (mini-GBIC)
Interfaces 48 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ 1 x management - RJ-45 ¦ 1 x management - Ethernet 10Base-T/100Base-TX - RJ-45
Miscellaneous
Authentication Method Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Compliant Standards NEBS level 3, CE, ETSI, CISPR 22 Class A, EN 60950, EN 61000-3-2, IEC 825-1/EN 60825-1 class 1, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, AS/NZS 60950-1, FCC Part 15, ICES-003 Class A, AS/NZS 3548
Power
Power Device Power supply - hot-plug / redundant - plug-in module
Installed Qty 1 (installed) / 2 (max)
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 - 90%